You turn on the air conditioning and a musty smell comes out of the vents. It could be dust on a warm coil, or it could be mold in the system.
Here is how to tell the difference.
What does mold in HVAC ducts look like and how is it removed?
Mold in an air handler or duct may look like dark or fuzzy growth on the drain pan, coil, insulation or flexible duct liner, often with a musty smell when the system runs. Removal involves cleaning or replacing the affected parts and fixing the moisture. We connect Sandy Springs homeowners with a local crew that inspects the system. An HVAC contractor may fix the drain or insulation behind it.
How moisture gets in
Cooling air makes condensation, and that water is supposed to drain away. A clogged drain line, a rusted pan or a leaky duct can leave water sitting inside.
Ducts running through a hot attic or crawl space without good insulation can sweat as well. Damp ducts collect dust, and dust plus moisture grows mold.
What a check involves
The technician looks at the air handler, the drain pan, the coil and accessible duct sections with a light and sometimes a small camera. They look for growth, stains and standing water.
Flexible duct with mold on its liner is usually replaced. Rigid metal duct may be cleaned.
Who does what
Mold crews and HVAC contractors often work together. The mold crew handles cleaning and containment, and the HVAC contractor fixes the drain, the sizing or the insulation.
Ask who owns each part. Cleaning ducts without drying the system leaves the cause in place.
Say it up front
Mention the smell and anything you have noticed about the system before work starts, so the crew knows what to check.
Contact us with your address and the details, and we will send your request to a local crew that serves your town.
Frequently Asked Questions
Is duct cleaning the same as mold removal?
No. Duct cleaning removes dust and debris. If mold is present, the job also needs moisture correction and possibly replacement of damaged parts. Ask whether a crew is cleaning, treating or replacing.
Should I keep running the system?
That depends on what is found. If you suspect mold, a crew can advise whether to run it. Weigh comfort and safety for the household. A new filter is a good habit but will not fix growth in the system.
Can an oversized system cause this?
Yes. A system that cools too quickly may shut off before it removes enough humidity. That leaves the air damp. An HVAC contractor can tell you whether sizing or runtime is a factor in your home.
